Table of Contents
Advertisement
Playback your Recordings
Playback using the
EVF
Before you begin...
* Connect the Palmcorder to a power source.
* Insert a recorded cassette.
1 Set the POWER switch to VCR.
2 ® Press REWIND/SEARCH to
rewind the tape.
(B Press PLAY to start playback.
© Press STOP to stop playback.
Auto Play
When the POWER switch is set to VCR,
the cassette will automatically begin
playback if the record tab has been
removed.
Helpful Note:
Search Speed
Standard Play (SP) Search is about 3 times the
normal speed, and Super Long Play (SLP)
SETUP A
Search is about 9 times the normal speed.
DOWN ¥
Special Effects Playback
Tracking Control
(Sound is Muted)
Auto Tracking
Rapidly Locate a Scene
Continuously analyzes the signal of each
Press FAST FORWARD/SEARCH or
recording for optimum picture quality.
REWIND/SEARCH
for rapid visual search.
M
! Tracki
Press again, or press PLAY to resume
anual
iracking
—
normal speed.
To minimize the noise in some recordings,
View a Still Picture
manual tracking may be necessary.
Press STILL to freeze the playback picture.
In Playback mode:
Press again to resume normal playback.
Press CLOCK SET UP A or DOWN Y
until picture clears.
Note:
Press DISPLAY to return to Auto Tracking.
* During search playback, horizontal noise bars
will appear and there will be no audio.
* To protect the tape and video heads, your
Palmcorder's operating modes will revert as
follows:
STILL ———
STANDBY after 5 minutes.
STANDBY — POWER OFF after 5 minutes
when using a Battery Pack.
* When the tape reaches its end during playback,
or fast forward, it will rewind automatically.
Advertisement
Table of Contents
