Panasonic Palmcorder IQ PV-A216 Operating Instructions Manual page 7

Supplying Power
Charge the Battery Pack
Charge the Battery Pack fully
before operation.
e)
D
=
=|
T
UL
+
y
=i
D o.
Plug in the AC Adaptor.
Lamp
insert the Battery
(& Align the right side of the Battery with
the line on the AC Adaptor.
(B Press down on the Battery and then
slide it in the direction of the arrow.
CHARGE Lamp lights up. It goes out
when charging is done (about one hour).
3 Remove the Battery
Slide the Battery out and then lift up.
* The useful operation time of the Battery will
gradually decrease after repeated use and
recharging. The Battery is no longer serviceable
if the operation time is very short, even after a
sufficient charge.
Note:
After recharging the Battery Pack about 5 times,
use the BATTERY REFRESH feature as
explained on page 8.
Battery Charging
Confirmation Marker
Use this marker as a reminder to yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
Use the Battery Pack
With a fully charged Battery Pack, you will have a maximum of about one hour of
continuous use.
1 Attach the Battery
(& Align the Battery with the top of the
mounting surface.
(B Press it into place until it locks with a
click.
While sliding the BATTERY RELEASE
button, remove the Battery.
7