Summary of Contents for Fired Up Corporation Onyx NDT-1522B
Page 1
INSTRUCTION MANUAL Electric Radiator This manual is for the following models: NDT10-22B1 NDT20-22B1 Solis NDT-1522B Onyx When the heater is turned on for the first time or when it has not been used for some time, it may release a slight, harmless odour. This odour is a normal occurrence caused by the initial heating of the internal heating elements and will disappear with use www.firedupcorporation.com/manual...
Read ALL the instructions before use. These instructions are for your safety. Please read through them thoroughly before use and retain for future reference. Failure to follow them could cause injury and/or property damage. CONTENTS Safety Instructions 03-04 Installation 04-05 Control Panel &...
SAFETY INSTRUCTIONS • Read ALL the instructions before using this product. • Check that the heater and all supplied accessories are present and in tact. • Always check your mains supply is the same as that indicated on the product before connecting.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Page 5
3. Place the bracket against the wall, ensure it is level and mark the 4 holes on the wall. Remove the bracket and drill 4 holes approximately 35mm deep and insert the wall plugs. Fix the bracket to the wall using the screws provided.
CONTROL PANEL & DISPLAY Temperature Day Indicator in Celsius Up/Increase Confirm Standby Mode Selection/Back Down/Decrease Temperature Time/Temperature in Fahrenheit Screen Display ICONS Standby Comfort Comfort Mode Comfort Mode On/Off Mode -1°C -2°C Anti-Frost Heating Reset Time Mode Mode Icon Indicator Weekly Program Open Window Child Lock...
Page 7
During the setting of the day and time, press to return to the previous step. The device will confirm and return to the home screen automatically if there is no action for 10 Seconds. Note: The temperature and time will be displayed alternatively on the home screen. Selecting the Mode Press the Mode key to cycle through Comfort Mode, Comfort Mode -1°C, Comfort Mode...
Page 8
Example, if you wanted to have the heater start the day in Anti-Frost Mode and go into Comfort Mode from 16:00 till 19:00, this is how each hour would have to be set up. 00:59 06:59 12:59 18:59 01:59 07:59 13:59 19:59 02:59...
Page 9
Modifying the Preset Programs (P1, P2 and P3) The preset programs can also be modified. To modify these use the Mode key to select a preset program and press to confirm. Then press and hold the Mode key and Confirm key to enter the setup for the preset programs.
TROUBLESHOOTING Problem Solution The appliance does Ensure that the circuit breakers are switched on in the not heat installation. Select Comfort Mode Increase the temperature setting. The appliance heats Ensure the heater is not in a draught/cold spot. constantly Reduce the temperature setting. CARE &...
TECHNICAL PARAMETERS Information requirements for electric local space heaters Value Item Symbol Unit Item Unit 1kW|1.5kW|2kW Heat output Type of heat input, for electric storage local space heaters only (select one) manual heat charge control, with integrated [yes/no] Nominal heat out- thermostat Minimum heat manual heat charge control with room and/or...
This product guarantee does not affect your statutory rights. CUSTOMER HELPLINE customer.support@firedupcorporation.com +44 (0) 3300 882 069 Fired Up Corporation Ltd Fired Up Buildings HD1 3LF, UK www.firedupcorporation.com Fired Up Corporation (Ireland) Ltd...
Need help?
Do you have a question about the Onyx NDT-1522B and is the answer not in the manual?
Questions and answers