Table of Contents
Advertisement
Tow fitting
General information
The screw-in tow fitting should always be carried
in the vehicle.
The tow fitting can be screwed in at the front or
rear of the vehicle.
The tow fitting is found in the onboard vehicle
tool kit.
Observe the following notes when using the tow
fitting:
▷
Use only the tow fitting provided with the ve‐
hicle.
▷
Turn the tow fitting at least 5 turns clockwise
and screw it in as far as it will go. If necessary,
tighten with a suitable object.
▷
After use, unscrew the tow fitting counter-
clockwise.
▷
Use the tow fitting for towing on paved roads
only.
▷
Avoid lateral loading of the tow fitting, for in‐
stance do not lift the vehicle by the tow fit‐
ting.
▷
Check the attachment of the tow fitting in
regular intervals.
Additional information:
Onboard vehicle tool kit, refer to page 355.
Breakdown Assistance
Online Edition for Part no. 01405A38D29 - VI/21
Safety information
NOTICE
If the tow fitting is not used as intended, there
may be damage to the vehicle or to the tow fit‐
ting. There is a risk of damage to property,
among other potential damage. Follow the
notes on using the tow fitting.
Screw thread for tow fitting
Press on the mark on the edge of the cover to
push it out.
Tow-starting
Do not tow-start the vehicle.
Start the engine by jump-starting, if possible.
Have the reasons for the starting difficulties cor‐
rected by a dealer's service center or another
qualified service center or repair shop.
Additional information:
Jump-starting, refer to page 362.
MOBILITY
365
Advertisement
Table of Contents
