Table of Contents
Advertisement
CONTROLS
Display on the Control Display
Press the button when the engine is run‐
ning.
Depending on the driving direction, the image of
the respective camera is displayed:
▷
"Front": front camera image.
▷
"Rear": rear camera image.
Depending on the vehicle equipment, cross traf‐
fic warning can additionally warn of approaching
vehicles using radar sensors.
Additional information:
Cross traffic warning, refer to page 268.
With navigation system:
activation points
Principle
Positions where Panorama View should switch
on automatically can be stored as activation
points provided that a Global Positioning System
signal is received.
General information
Up to ten activation points can be stored.
Activation points can be used when driving for‐
ward for the front camera.
Storing activation points
1.
Drive to the position at which the system is to
be switched on, and stop.
2.
Press the button.
3.
Tilt the Controller to the right.
4.
"Activation point"
The current position is displayed.
5.
"Save activation point"
Activation points are, if possible, stored with
town/city and street address, or else with the
Global Positioning System coordinates.
266
Driver assistance systems
Online Edition for Part no. 01405A38D29 - VI/21
Using activation points
The use of activation points can be switched on
and off.
1.
Press the button.
2.
Tilt the Controller to the right.
3.
"Settings"
4.
"Panorama View, GPS-based"
5.
"Panorama View is displayed automatically
when set activation points are reached."
Displaying activation points
1.
Press the button.
2.
Tilt the Controller to the right.
3.
"Manage points"
A list of all activation points is displayed.
Renaming or deleting activation
points
1.
Press the button.
2.
Tilt the Controller to the right.
3.
"Manage points"
A list of all activation points is displayed.
4.
Select an activation point as needed.
5.
Select the desired setting.
Functional limitations
The Surround View functional limitations apply.
Additional information:
Surround View, refer to page 260.
System limits
The limits of the Surround View system apply.
Additional information:
Surround View, refer to page 260.
Advertisement
Table of Contents
