Whirlpool WD1600S User Instruction page 18

INSTALLATION
4. Lift the door and place it on a soft pad. Then remove another
door as same process.
5. Unscrew bottom hinges.
6. After the appliance is positioned! install the doors as reversed process.
Space Requirement
Keep enough space of door open.
Keep at least 50mm gap at two sides and back.
9
Levelling the refrigerator
Positioning
Install this appliance at a location where the ambient temperature corresponds
to the climate class indicated on the rating plate of the appliance:
for refrigerating appliances with climate class:
-extended temperate: this refrigerating appliance is intended to be used at
ambient temperatures ranging from 10 °C to 32 °C; (SN)
-temperate: this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C;(N)
-subtropical: this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C;(ST)
-tropical: this refrigerating appliance is intended to be used at ambient
temperatures ranging from 16 °C to 43°C;(T)
Location
The appliance should be installed well away from sources of heat such as
radiators, boilers, direct sunlight, etc. Ensure that air can circulate freely
around the back of the cabinet. To ensure best performance, if the appliance
is positioned below an overhanging wall unit, the minimum distance between
A
the top of the cabinet and the wall unit must be at least 100 mm. Ideally,
B
however, the appliance should not be positioned below overhanging wall
C
D min= 0
units. Accurate leveling is ensured by one or more adjustable feet at the base
E min=50
F
of the cabinet.
G
H This refrigerating appliance is not intended to be used as a built-in appliance;
Warning!
power supply; the plug must therefore be easily accessible after installation.
It must be possible to disconect the appliance from the mains
10