Advertisement
Quick Links
Fountain Components
Image
Item Description
Mondrian
Fountain -
Spiller Stop
Mondrian
Fountain -
Water Feature
Mondrian
Fountain -
Pump Cover
Mondrian
Fountain - Basin
Fountain Information:
• Two people are recommended for the installation of this fountain!
• This fountain holds approximately 10 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPF525 - 525 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Safety Gloves
Component
Quantity
Item #
FT-379A
1
FT-379B
1
FT-379C
1
FT-379D
1
FT-379 Mondrian Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
(use adapter indicated)
#10 Stopper
#7 Wing nut drain stopper
(Drain-7)
Tubing Assembly #1
6" length of 1/2" black non-kink tubing
1 1/2" length of 5/8" clear-tubing
1 1/2" length of 1/2" CPVC pipe
Tubing Assembly #2
8" length of 1/2" black non-kink tubing
1 1/2" length of 5/8" clear tubing
1 1/2" length of 1/2" CPVC pipe
Copper mesh
(FT-379CP)
Copper spillers
(FT-379SPL)
front view
Blue Matala filter square
Hose Clamps
Proudly
MADE IN USA
Quantity
PK 500
1
1
1
1
1
1
1
2
2
1
3
3
Silicone
1
Wedges
2
1
rev 11/18/2021
Advertisement
Related Manuals for Campania International Mondrian
Summary of Contents for Campania International Mondrian
- Page 1 FT-379 Mondrian Fountain Assembly Instructions Fountain Information: • Two people are recommended for the installation of this fountain! • This fountain holds approximately 10 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-379 Mondrian Fountain Assembly Instructions Two people are recommended for the installation of this fountain! Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-379 Mondrian Fountain Assembly Instructions Step 11 - Place pump cover (FT-379C) in place around the pump and the cord. Be sure that it is centered under the three spouts in the water feature (FT-379B). Step 12 - Carefully place the copper mesh (FT-379CP) into the recess at the top of the pump cover (FT-379C).
- Page 4 Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - Ensure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.