Advertisement
Quick Links
Fountain Components
Image
Item Description
Monteros
Fountain - Finial
Monteros Ftn -
Small Bowl
Monteros Ftn -
Small Pedestal
Monteros Ftn -
Sm. Access Door
Monteros Ftn -
Medium Bowl
Monteros
Fountain -
Med. Pedestal
Monteros
Ftn - Med.
Access Door
Monteros
Fountain - Base
Monteros Ftn
- Large Access
Door
Monteros Urn
Fountain Information:
• Professional installation is recommended for this fountain!
• This fountain holds approximately 25 gallons of water.
• This fountain uses a medium fountain cover: FTNCOV-MED
• Compatible with #10 Refill Device and LED kit
• A special stopper is required to use the refill kit for this fountain
Pump Information:
OEMPP800 - 800 GPH Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Component
Quantity
Item #
FT-269A
1
FT-269B
1
FT-269C
1
FT-269D
1
FT-269E
1
FT-269F
1
FT-269G
1
FT-269H
1
FT-269I
1
P-711
1
FT-269 Monteros Fountain
Assembly Instructions
Pump Kit Parts List
Image
Component
PK800 pump
#10 Stopper
#7 Drain Stopper
Approx. 24" length of 1/2" black
non-kink tubing
Approx. 2" length of 3/4" clear vinyl
Approx. 2" length of 5/8" clear vinyl
Approx. 18" length of 1/2" black
non-kink tubing
Hose Clamps
Proudly
MADE IN USA
Quantity
1
1
2
1
1
tubing
1
tubing
1
Wedges
6
3
rev 4/23/2020
Advertisement
Related Manuals for Campania International Monteros
Summary of Contents for Campania International Monteros
- Page 1 FT-269 Monteros Fountain Assembly Instructions Fountain Information: • Professional installation is recommended for this fountain! • This fountain holds approximately 25 gallons of water. • This fountain uses a medium fountain cover: FTNCOV-MED • Compatible with #10 Refill Device and LED kit •...
- Page 2 FT-269 Monteros Fountain Assembly Instructions Professional installation is recommended for this fountain! Assemble on a level surface using crushed stone, gravel, or cement pad as the base. Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin.
- Page 3 FT-269 Monteros Fountain Assembly Instructions Step 9 - Position the medium bowl (FT-269E) over the large pedestal (FT-269F). Step 10 - Using a hose clamp, secure the tubing that was fed through the large pedestal (FT-269F) to the pipe protruding from the bottom of the medium bowl (FT-269E).
- Page 4 FT-269 Monteros Fountain Assembly Instructions Step 19 - Fit the medium pump cover door (FT-269G) into the medium pedestal (FT-269F). FT-269G (5 lbs) 6.25"L x 1.5"W x 5.25"H Step 20 - Fit the base door (FT-269I) into the base (FT-269H).
-
Page 5: Maintenance
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.