PAW SolarBloC midi Basic 2S Installation And Operation Instruction Manual page 10

Not included in the scope of delivery!
Risk to life and limb due to electric shock!
►
►
The assembly of the solar station is now completed and the station can be put into operation.
10
WARNING
Prior to commencing electrical work on the controller, pull the mains plug!
Only after completing all installation work as well as the flushing and filling,
the mains plug of the controller can be plugged into a socket. This avoids an
unintentional start of the motors.
99775810x-mub-en - V01
3 Mounting and installation [specialist]
11. Connect the pipe for the expansion tank to [7.4]
and fix the bracket for the expansion tank.
12. Adapt the initial pressure of the expansion tank
to the system and connect the expansion tank.
Observe the separate instructions for the
expansion tank!
13. Check all thread connections and tighten them
if necessary.
14. Connect the pumps and the sensors to the
controller.
09/2023