How To Set The Appliance For Surface Cooking - Samsung NE63 6517S Series User Manual

Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 65 °C.
Cooktop on/off lamp
• The lamp turns on when the surface control knobs are not in off position.
• The lamp turns off when the surface control knobs are in off position.
Cooking areas
• The cooking areas on your range are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
• Pans should not extend more than ½˝ to 1˝ beyond the cooking area.
• When a control is turned on, you can see a glow through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
• For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware" on page 27.
DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 25 DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 25

How to set the appliance for surface cooking

CAUTION
• The surface elements may be hot even when off and burns can occur. Do not
touch the surface elements until they have cooled down sufficiently.
• At high or medium-high settings, never leave food unattended. Boilovers
cause smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
Single surface unit control knob (Left Rear, Right Rear)
1.
2.
Push the knob in.
Turn in either direction to the setting
you want.
• At both the off and high settings,
the knob clicks into position.
English 25
2023-06-23 오후 4:39:20 2023-06-23 오후 4:39:20