Removing And Reinstalling The Storage Drawer - Samsung NE63 6517S Series User Manual

Maintaining your appliance
Fig. 2 Fig. 2
How to re-install the door
Bottom Bottom Hinge arm Hinge arm
edge of edge of
slot slot
Indentation Indentation
Firmly grasp both sides of the door at the top.
1.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
48 English
DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 48 DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 48
5. Lift door up and out until the hinge arm
is clear of the slot (Fig. 2).
Unlocked position Unlocked position
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5. Close the oven door.

Removing and reinstalling the storage drawer

Hook Hook Hook Hook
Hinge lock Hinge lock
Locked position Locked position
How to remove the storage drawer
Pull the drawer out until it stops.
1.
2. Tilt the front of the drawer and pull
out it.
How to replace the storage drawer
1. Put the left side of the drawer over the
left hook and the right side over the
right hook.
2. Push the drawer until it stops.
2023-06-23 오후 4:39:25 2023-06-23 오후 4:39:25