Electrical Safety - Samsung NE63 6517S Series User Manual

Important safety instructions Important safety instructions
• Be sure you know which control knob operates each surface
unit. Make sure you turned on the correct surface unit.
• Always turn the surface units off before removing cookware.
• When preparing flaming foods under the hood, turn the fan on.
• Keep an eye on foods being fried at high or medium high
heat settings.
• Do not store heavy items above the cooktop surface that
could fall and damage it.
• Do not use decorative surface element covers – If an element
is accidentally turned on, the decorative cover will become
hot and possibly melt. Burns will occur if the hot covers are
touched. Damage may also be done to the cooktop.

ELECTRICAL SAFETY

• Proper Installation - Be sure your appliance is properly
installed and grounded by a qualified technician.
• The appliance should be serviced only by qualified service
personnel. Repairs carried out by unqualified individuals
may cause injury or a serious malfunction. If your appliance
is in need of repair, contact a Samsung authorized service
center. Failure to follow these instructions may result in
damage and void the warranty.
SAVE THESE INSTRUCTIONS
12 English
DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 12 DG68-01577A-00_NE63C6517SS_ZA_AR+EN.indb 12
• Flush-mounted appliances may be operated only after they
have been installed in cabinets and workplaces that conform
to the relevant standards. This ensures that the appliances
are installed in compliance with the appropriate safety
standards.
• If your appliance malfunctions or if fractures, cracks, or
splits appear:
- switch off all cooking zones.
- unplug the range from the AC wall outlet.
- contact your local Samsung service center.
WARNING
• If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock. During use the appliance becomes
hot. Care should be taken to avoid touching heating elements
inside the oven.
• The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules. This Appliance
should be allowed to disconnection from the supply after
installation. The disconnection may be achieved by having the
plug accessible or by incorporating a switch in the fixed wiring in
accordance with the wiring rules. If the supply cord is damaged,
it must be replaced by a special cord or assembly available from
the manufacturer or its service agent.
2023-06-23 오후 4:39:19 2023-06-23 오후 4:39:19