GE 23 Owner's Manual And Installation page 5

About the temperaturecontrols. .ecorn
Not all features are on all models.
f
® Adjust Temperature
rooo
,orm wo mor
• olde olde 0
_Light_ o°FisR ....... ..... E_pressChi_
37°F is Recommended
• ® • 0
_JCwater_') _-w er_ _r ed_ _-C d_ _u _ _Lock_
|Fitter I at ush ube ickt
.o,d. ..... d .o.ooot .o,d. ..... d .
The temperature controls are preset in the factory at 37°F for the
refrigerator compartment and O°Ffor the freezer compartment. Allow
24 hours for the temperature to stabilize to the preset recommended
settings.
The temperature controls can display both the SET temperature
as well as the actual temperature in the refrigerator and freezer.
The actual temperature may vary slightly from the SET temperature
based on usage and operating environment.
Setting either or both controls to OFF stops cooling in both the freezer
and refrigerator compartments, but does not shut off electrical power
to the refrigerator.
NOTE: The refrigerator is shipped with protective film covering the
temperature controls. If this film was not removed during installation,
remove it now.
Performance Air FlowSystem
The PeHkmnance
Air How System is designed
to maximize temperattu'e control in the reiiigerator and
fl'eezer compartments. This tmique special feature consists of the Air Tower along the back wall of the
refiigerator and the _dr Tmmel on the bottom portion of the ti'eezer rear wall. Plating food in ti'ont oI
the lou\'e_ on these components will not affect perf0nnance. _Mthough the _dr Tower and the _Mr Ttmnel
can be removed, doing so will aftoct temperatm'e perfkmnance. (For removal instructions, on-line,
24 hom_ a day, contact
us at ge.com
or call 800.GE.CARES. In (_mada, contact
us at geappliances.ca
or call 1.800.361.3400.)