Pioneer CT-70R Service Manual page 31

10.1.9 Cassette Pocket Damper Adjustment
Adjustment location Specifications
Damper cylinder adjustment The door must open smoothly without going through a two-stage motion, and without any bouncing
screw back when fully opened.
Opening speed Opening speed
stowed down Speeded up
Adjustment screw
[Reference value:
A=2+0.5mm]
Fig. 10-8 Cassette pocket damper adjustment
10.1.10 Door Position Adjustment
The dimensional ratio of A to B, and C to D must be within the 0.5 to 2 range (The dimensions taken when facing the deck
from the front).
(the dimensions taken when facing the deck from the front).
A thru G : Gap dimensions
front
. ' ; Screwdriver
Adjustment of dimensions
Cassette pocket A and B (single position)
door
Adjustment of dimensions C, D, £, F, and G
{single positions on left and right hand sides) Screwdriver
ae
Fig. 10-9 Door position Fig. 10-10 Door position adjustment
41