Device Assembly - ADS ForeSITE FS-UL-4G Installation, Operation And Maintenance Manual

ADS ForeSITE FS-UL-4G Manual
o After installing battery O-ring, ensure battery is connected to the battery input
on the PCBA.

Device Assembly

• The O-ring supplied in the separately labelled bag MUST be installed in the groove of the
device lid.
• The largest O-ring MUST be installed between the back of the device lid and the bottom
"bucket" of the housing.
• Ensure that the two large O-rings are greased with the supplied O-ring grease once they
are installed. A light smear of grease is to be run completely around the O-rings before
11