Advertisement
Available languages
Available languages
Your TV has A V input terminals, .._Set the T V tothe mode or channel
but isnot set t oits VIDEO
mode. appropriate
for v ideo playback.
(_--- 18)
The c assette
holder cover is open..._Close
the cassette
holder cover.
(_:_"
13)
.._Clean
the v ideo heads with a n
optional
cleaning
cassette.
(_:y 2)
The A C Adapter
is connected
to
the camcorder.
The c amcorder
turned off
automatically.
-_Disconnect
the AC adapter
from
the camcorder.
.._Turn
the camcorder
off, then o n
again.
_
_
,.,, * Displays the battery remaining
power.
High
* As the battery power comes close to nil, the battery remaining power
indicator blinks. When the battery power is exhausted,
power turns off
_
_
_
automatically.
Exhausted
SET TO MANUAL
* Appears when you attempt to change 'Menu Settings", ' Backlight
MODE
Compensation"
or "Manual Focus" while in AUTO mode D. (J 9)
TAPE END
* Appears when the tape ends during recording or playback.
LENS CAP
* Appears for 5 seconds after power is turned on if the lens cap is
attached or when it is dark.
SET DATE/TIME!
* Appears when the date/time
is not set.
(LJ- 12).
• The built-in clock battery has run out and the previously set date/time
has been erased. Consult your nearest JVC dealer for replacement.
r'_
* Appears if a tape is loaded while the Power Switch is set to "REC".
• Blinks when no tape is loaded.
CHECK TAPE'S
* Appears when the erase protection
tab is set to "SAVE" while the Power
ERASE PROTECTION
Switch is set to "REC".
TAB
UNIT IN SAFEGUARD
* Error indications
01, 02 or 06.
MODE REMOVE AND
Remedy: Remove and reattach the power supply or battery.*
R EATTAC H BATTERY
OR DC PLUG
UNIT IN SAFEGUARD
* Error indications
03 or 04.
MODE EJECT AND
Remedy: Eject the cassette and reinsert.*
REINSERT TAPE
The camcorder
turns off automatically.
Re-check if the indication
clears. When it does, you can
resume using the camcorder.
If the indication
remains, consult your nearest JVC dealer.
Advertisement
