Storage And Maintenance; Specifications - G3 Ferrari G30054 User Manual

STORAGE AND MAINTENANCE

1. Do not drop this monitor or subject it to strong impact.
2. Avoid high temperature and solarization. Do not immerse the monitor in water as this will result in
damage to the monitor. If this monitor is stored near freezing, allow it to acclimate to room
temperature before use (around 30 minutes).
3. If you do not use the monitor for a long time, please remove the batteries.
4. It is recommended the performance should be checked every 2 years or after repair. Please contact the
service center. Do not attempt to disassemble this monitor.
5. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after moistened with water,
diluted disinfectant alcohol, or diluted detergent.
6. It is recommended the cuff should be disinfected 2 times every week if needed (For example, in
hospital or in clinique). Wipe the inner side (the side contacts skin) of the cuff by a soft cloth
squeezed after moistened with Ethyl alcohol (75-90%), then dry the cuff by airing.
7. Not servicing/maintenance while the monitor is in use.

SPECIFICATIONS

- Model G3Ferrari G30054
- Measurement Method oscillometric, inflation Pump driven
- Cuff diameter: 13-21.5cm
- Measurement Range
o
Cuff pressure: 0-300mmHg
o
Systolic: 60-260mmHg
o
Diastolic: 40-199mmHg
o
Pulse rate: 40-180 battiti/minuto
- Accuracy: Pressure: +/- 3 mmHg, Pulse rate: +/- 5%
- Power supply 2xAAA batteries
- Environment temperature for operation: 10°C~40°C (50°F~104°F)
- Environment humidity for operation: 15-93% RH
- Environment temperature for storage and transport: -25°C~70°C (-13°F~158°F)
Environment humidity for storage and transport: ≤93% RH
-
- Environment pressure: 700hPa-1060hPa
- Battery life: Approx 2 months at 3 tests per day
450MHz, 28 V/m
710, 745, 780MHz, 9 V/m
810, 870, 930MHz, 28 V/m
1720, 1845, 1970MHz, 28 V/m
2450MHz, 28 V/m
5240, 5500, 5785MHz, 9 V/m
12