Philips 43BDL3650Q User Manual page 4

43BDL3650Q/50BDL3650Q/55BDL3650Q
Environmental absolute ratings
Item
Storage temperature
Operation temperature
Glass Surface temperature
(Operation)
Storage humidity
Operating humidity
• LCD panel temperature need to be 25 degrees Celsius at all time for better luminance performance.
• Only the lifetime of the display stated in this specification is guaranteed if the display is used under the proper operation
conditions.
IMPORTANT: Always activate a moving screen saver program when you leave your display unattended. Always activate a periodic
screen refresh application if the unit will display unchanging static content. Uninterrupted display of still or static images over
an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. This is a well-known
phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear
gradually over a period of time after the power has been switched off.
WARNING: Severe "burn-in" or "after-image" or "ghost image" symptoms will not disappear and cannot be repaired. This is also
not covered under the terms of your warranty.
Service:
• The casing cover should be opened only by qualified service personnel.
• If there is any need for repair or integration, please contact your local service center.
• Do not leave your display under direct sunlight.
If your display does not operate normally, having followed the instructions set out in this document, please contact
a technician or your local service center.
Stability Hazard.
The device may fall, causing serious personal injury or death. To prevent injury, this device must be securely attached to the floor/
wall in accordance with the installation instructions.
Min. Max. Unit
-20 65 °C
0 40 °C
0 65 °C
5 90 % RH
20 80 % RH
2