Subscribe to Our Youtube Channel
Related Manuals for Witt WCI6045-1BG
Summary of Contents for Witt WCI6045-1BG
- Page 1 User Guide ENG Witt built-in wine appliances-2 WCI6045-1BG / WI6045H-1B24 WCI6060-1BG / WCI6060-2BG / WI6060H-2B26 / WCISK60BG WCI6088-2BG / WCI60188-2BG / WI60182H-2P101...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Warnings ......................3 Before loading and plugging in the wine cabinet ..........5 Grounding instructions ..................6 Installation ....................... 6 Installation drawings ..................8 Operation ....................... 16 Turning on your wine cabinet ................ 16 Operating noises .................... 16 Loading your wine cabinet ................ -
Page 3: Warnings
The information in this document is subject to modification without any prior notice. Some models are available in dedicated countries only. Witt offers no guarantee for our wine cellar if it is being used for any purpose other than that for which it was specifically designed. We cannot be held responsible for any error in this manual. - Page 4 R600a WARNINGS: For your safety observe the following recommendations. • This appliance contains a small quantity of R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. • During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
-
Page 5: Before Loading And Plugging In The Wine Cabinet
• WARNING: Do not damage the refrigerant circuit. WARNING: Do not use electrical appliances inside the food storage • compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING: If you do not use the machine for a long time, please unplug the •... -
Page 6: Grounding Instructions
Notes: • WCI6045-1BG, WI6045H-1B24, WCI6060-1BG, WCI6060-2BG, WI6060H-2B26, WCI6088-2BG, WCI60188-2BG, WI60182H-2P101, WCISK60BG are built-in model only. Wine cellar should be placed where the ambient temperature is proper (Please view the end of Manual). If the temperature is above or below this range, it will affect the performance of the cellar. -
Page 7: Installation
INSTALLATION INSTRUCTIONS 1. Please follow the installation diagram when installing wine cellars. No less than the minimum installation dimension, or it will affect the venting of cellar. 2. All WCI and WI models have rear ventilation and must be able to draw air from underneath the appliance. -
Page 8: Installation Drawings
Ensure good ventilation according to the installation drawings, otherwise it will affect the wine cooler working normally. Note: The appliance must be positioned so that the plug is accessible after installed. WCI6045-1BG/WI6045H-1B24 WCI6045-1BG with open door WI6054H-1B24 with open door WCI6088-2BG WCI6088-2BG WCI6088-2BG... - Page 9 WCI6088-2BG with open door...
- Page 10 WCI6060-1BG/WCI6060-2BG/WI6060H-2B26/WCISK60BG WCI6060-1BG/WCI6060- 2BG/WI6060H-2B26/ WCISK60BG with open door...
- Page 11 WCI60188-2BG WCI60188-2BG with open door...
- Page 12 WI60182H-2P101...
- Page 13 Fixing bracket installation 1.Level the wine cooler, take 2 fixing brackets ① 2 x 5*16 flat head screws ② and 4 screw covers ③ from the polybag. Remove 4 trunk-nails on the left side frame, fix the brackets ① on the left side of with a Philips screwdriver. 2.Take 4 X 4*12 self-tapping screws ④...
- Page 14 the screws in the oval groove in the door frame and adjust the door panel, and screw up and down with a screwdriver. After the approximate position of the door panel is adjusted, screw two 5 * 25 screws through the oval hole of the positioning support ⑦ and let the screws pass through the middle hole of the door frame according to following figures and tighten the screws to prevent the door body from loosening.
- Page 15 WI60182H-2P101 with open door RADIATOR SYSTEM DESCRIPTION WCI6045-1BG/WCI6060-1BG/ WCI6060-2BG/ WCI6088-2BG/WCI60188-2BG/ WI6045H-1B24/WI6060H-1B26/WCISK60BG adopt back heat dissipation system...
-
Page 16: Operation
TURNING ON YOUR WINE CELLAR Plug in and switch on the cellar by pressing on the power button for a few seconds. When you use the wine cellar for the first time (or restart the wine cellar after having it shut off for a long time), there will be a few degrees variance between the temperature you have selected and the one indicated on the LED readout. - Page 17 • Keep small gap between the walls and the bottles to allow air circulation. Like an underground cellar air circulation is important to prevent mould and for a better homogeneous temperature within the cellar. DANGER! • Do not overload your wine cellar to facilitate air circulation. Do not stack more than 1.5 rows of standard 0.75L bottles per shelves to •...
-
Page 18: Temperature Setting
TEMPERATURE SETTINGS Important: The LED displays by default the actual internal air temperature. The temperature of the power, before all Settings will be resumed after the electricity to power the pre-set temperature. The electrical board of all models comes with memory function. It is important to understand that there is a difference between the air temperature inside the wine cellar and the actual temperature of the wine: You will need to wait approximately 12 hours before noticing the effects of temperature adjustment due... -
Page 19: Control Panels
CONTROL PANELS Control panel WCI6045-1BG/WI6045H-1B24 ① Display Window Display the measured temperature inside the wine cooler. Each time, the temperature inside will drop 1 ℃, until reduced to a minimum, and ② Cycle Button then a return to the highest temperature. - Page 20 Control panel WCI6060-1BG ① Lamp & Power Button When power cord connected: press and hold for 3 seconds, power is turned on, the machine starts. In the machine power-on-state: press this button, LED lights on; Press once again, LED lights off. In the machine power-on-state: press and hold for 3 seconds, power is turned off, the machine is off.
- Page 21 Control panel WCI6060-2BG/WI6060H-2B26/WCISK60BG ① Lamp & Power Button When power cord connected: press and hold for 3 seconds, power is turned on, the machine starts. In the machine power-on-state: press this button, LED lights on; Press once again, LED lights off. In the machine power-on-state: press and hold for 3 seconds, power is turned off, the machine is off.
- Page 22 Control panel WCI60188-2BG/WI60182H-2P101 ① “ON/OFF” the power button Press the button 3 seconds to power off (Window ④ digital countdown displays 3, 2, 1,). Press again (without delay), the power turns on. ② Upper zone temperature setting up button ...
- Page 23 Control panel (optional) / Display light switched off for visual optimization When this function is activated, only the interior lighting is switched on. The temperature light in the display is switched off. The display light is automatically switched on at door opening. 1.
-
Page 24: Wine Serving Temperature Chart
⑥ Lower zone temperature setting up button press one time, window ⑤ the set value will increase 1 degree Celsius in the original setting temperature, the setting range accordingly to customer requirements. ⑦ Lower zone temperature setting down button ... -
Page 25: Important Information About Temperature
IMPORTANT INFORMATION ABOUT TEMPERATURE Your wine cellar has been designed to guarantee optimum conditions for storing and/or serving your wines. Fine wines require long and gentle developments and need specific conditions in which to reach their full potential. All wines mature at the same temperature, which is a constant temperature set between 12ºC to 14ºC. -
Page 26: Sliding Shelves
All units are equipped with a double-glazed glass door that has a third internal acrylic layer to minimize condensation on the glass door. The wine cellar is not totally sealed; fresh air admission is permitted through the drainpipe. Air is circulated through the cellar by means of a fan/fans and the hollow shelves. -
Page 27: Reversibility Of The Door
REVERSIBILITY OF THE DOOR REMARK: WCBC6082-2BG/ WI6045H-1B24 models can’t be door reversible. REMARK: If your wine cabinet is equipped with lock at the bottom of the door, the door is not reversible, so you must order one right opening door to change the opening side. - Page 28 1.Decorative nail 2. Knife 3. Drop-proof device 4. M5 six angle 5. M5 six angle screwdriver 6. Door spindle core 7. Upper door hinge 8. Lower door hinge...
- Page 29 WCI60188-2BG/WI60182H-2P101 1. Put the cabinet in an open operating area, have the door opened to the maximum angle. 2. Use the knife ② to remove the decorative nails① from the left side of the cabinet. (Figure 1) 3. Use the Phillips screwdriver④ to remove the M5 Phillips countersunk screw③ that fix the upper and lower door hinges.
- Page 30 4. Rotate the door by 180 degrees and install it to the other side of the cabinet. (Figure 3 and 4) 5. At last, install all decorative nails to the other side of the door①, door installation is all set! (Figure 5)
- Page 31 WCI6045-1BG/WCI6060-1BG/WCI6060-2BG with touch opening 1. Knife 2. Decorative nail 3. Cross screwdriver 4. Door shaft screw 5. Upper door hinge 6. M5 six angle screwdriver 7. Lower door hinge 8. Probe needle 9. Metal plate...
- Page 32 Warning: To avoid accidents during the process of changing the door, we recommend that you get assistance. The glass door is heavy and may cause injury if dropped. Please turn off the power before reversing the door. 1. Use knife to pry the six trunk-nails from left side of cabinet. Please be careful, don’t hurt the hands and don’t damage the surface of cabinet (Picture 1) 2.
- Page 33 WCI6088-2BG / WI6060H-2B26 / WCISK60BG 1. Knife 2. Decorative nail 3. Cross screwdriver 4. Door shaft screw 5. Upper door hinge 6. M5 six angle screwdriver 7. Lower door hinge...
- Page 34 Remark: Before operating the reversibility, need to power off at first, and need to cooperate with two people! 1. Open the to the maximum angle, pry out the four decorative nails (2) on the left side of the box with a medium knife (1) and put them aside for standby. Note: don't hurt your hands (see Figure 1).
- Page 35 2. Take out 3pcs Phillips screws from accessory bag, use Phillips screwdriver to tighten the fixed plate on the lower left side of wine cooler (1pcs screw) , then tighten the other 2pcs Phillips screws on the upper door hinge and lower door hinge.
-
Page 36: Operating Instructions - Auto-Door
AUTO-DOOR OPERATING INSTRUCTION WCI6060-1BG/WCI6060-2BG 1. Operate the auto-door in the power-on state. 2. Locate the touch point on the door. Place your finger on the touch point and keep your finger on the point for a few seconds until the door opening sensor is activated. -
Page 37: Operation Abnormalities
Note: When opening the door manually, the system can activate the opening sensor, when the door is closed. If this happens, the appliance will automatically re-open the door. Therefore, you should always check the door closing after manual door opening. If the door opens, wait until the push function is retracted before closing the door. -
Page 38: Troubleshooting Guide
TROUBLESHOOTING GUIDE Common problems may easily be solved, saving you the cost of a possible service call. Please carefully read the instruction manual and revert to troubleshooting guide chart. PROBLEM POSSIBLE CAUSE Wine cellar Not plugged in. does not The appliance is turned off. operate. -
Page 39: Before Disposal Of The Appliance
BEFORE DISPOSAL OF THE APPLIANCE. 1. Disconnect the main plug from the main socket. 2. Cut off the main cable and discard it.
Need help?
Do you have a question about the WCI6045-1BG and is the answer not in the manual?
Questions and answers