Subscribe to Our Youtube Channel
Related Manuals for Witt WCU3082-1BG
Summary of Contents for Witt WCU3082-1BG
- Page 1 User Guide ENG Witt Table-Top wine appliances -2 WCU3082-1BG / WU3082T-2B17 / WU6082T-2B39 / BC6082-1BG / WCU6082-2BG / WCBC6082-2BG / WCUSK82BG / WU6082H-2P39...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Warnings ......................3 Before loading and plugging in the wine cabinet ..........5 Grounding instructions ..................6 Installation ....................... 6 Installation drawings ..................8 Ventilation system ..................11 Operation ....................... 12 Turning on your wine cabinet ................ 12 Operating noises .................... -
Page 3: Warnings
The information in this document is subject to modification without any prior notice. Some models are available in dedicated countries only. Witt offers no guarantee for our wine cellar if it is being used for any purpose other than that for which it was specifically designed. We cannot be held responsible for any error in this manual. - Page 4 R600a WARNINGS: For your safety observe the following recommendations. • This appliance contains a small quantity of R600a refrigerant which is environmentally friendly, but flammable. It does not damage the ozone layer, nor does it increase the greenhouse effect. • During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
-
Page 5: Before Loading And Plugging In The Wine Cabinet
• WARNING: Do not damage the refrigerant circuit. WARNING: Do not use electrical appliances inside the food storage • compartments of the appliance, unless they are of the type recommended by the manufacturer. WARNING: If you do not use the machine for a long time, please unplug the •... -
Page 6: Grounding Instructions
• WCU3082-1BG, WU3082T-2B17, BC6082-1BG, WCU6082-2BG, WCBC6082-2BG, WCUSK82BG, WCU6082T-2B39 models are both table-top and free-standing as per the drawings thereafter. Wine cellar should be placed where the ambient temperature is proper (Please view the end of Manual). If the temperature is above or below this range, it will affect the performance of the cellar. -
Page 7: Installation
INSTALLATION INSTRUCTIONS FOR TABLE-TOP MODELS - FRONT VENTING ONLY. 1. Table-top models are front venting but are not designed to be fully integrated behind a joinery door. 2. Please follow the installation diagram when installing wine cellars. No less than the minimum installation dimension, or it will affect the venting of cellar. -
Page 8: Installation Drawings
INSTALLATION DRAWINGS Ensure good ventilation according to the installation drawings, otherwise it will affect the wine cooler working normally. Note: The appliance must be positioned so that the plug is accessible after installed. WCU3082-1BG/WU3082T-2B17 BC6082-1BG/WCU6082-2BG/WCBC6082-2BG/WCUSK82BG/WU6082T-2B39... - Page 9 WU6082H-2P39...
- Page 10 INSTALLATION DRAWINGS (OPEN DOOR) WCU3082-1BG/WU3082T-2B17 BC6082-1BG / WCU6082-2BG / WCUSK82BG / WU6082T-2B39...
-
Page 11: Ventilation System
WCBC6082-2BG RADIATOR SYSTEM DESCRIPTION Models use side anti-dew tube and independent cooling system... -
Page 12: Operation
TURNING ON YOUR WINE CELLAR Plug in and switch on the cellar by pressing on the power button for a few seconds. When you use the wine cellar for the first time (or restart the wine cellar after having it shut off for a long time), there will be a few degrees variance between the temperature you have selected and the one indicated on the LED readout. - Page 13 • Keep small gap between the walls and the bottles to allow air circulation. Like an underground cellar air circulation is important to prevent mould and for a better homogeneous temperature within the cellar. DANGER! • Do not overload your wine cellar to facilitate air circulation. Do not stack more than 1.5 rows of standard 0.75L bottles per shelves to •...
-
Page 14: Temperature Setting
TEMPERATURE SETTINGS Important: The LED displays by default the actual internal air temperature. The temperature of the power, before all Settings will be resumed after the electricity to power the pre-set temperature. The electrical board of all models comes with memory function. It is important to understand that there is a difference between the air temperature inside the wine cellar and the actual temperature of the wine: You will need to wait approximately 12 hours before noticing the effects of temperature adjustment due... -
Page 15: Control Panels
CONTROL PANELS CONTROL PANEL WCU3082-1BG/WCBC6082-2BG ① Display Window Display the measured temperature inside the wine cooler. Each time, the temperature inside will drop 1 ℃, until reduced to a minimum, and ② Cycle Button then a return to the highest temperature. - Page 16 Control panel BC6082-1BG ① ON/OFF the power button In the standby mode: press 3 seconds, the power is turned on, the whole machine starts. In the power-on state: press the power button, window 4 shows the countdown 3 2 1, the power is turned off, the machine is turned off (show 3 2 1 process, the hand cannot leave the button).
- Page 17 Control panel WCU6082-2BG/WCUSK82BG/WU6082T-2B39/ WCU6082H-2P39 ① “ON/OFF” the power button Press the button 3 seconds to power off (Window ④ digital countdown displays 3, 2, 1,). Press again (without delay), the power turns on. ② Upper zone temperature setting up button ...
- Page 18 Control panel WU3082T-2B17 ① “ON/OFF” the power button: In the standby mode: press 3 seconds, the power is turned on, the whole machine starts. In the power-on state: press the power button, window 3 shows the countdown 3 2 1, the power is turned off, the machine is turned off (show 3 2 1 process, the hand cannot leave the button).
-
Page 19: Wine Serving Temperature Chart
WINE SERVING TEMPERATURE CHART All wines mature at the same temperature, which is a constant temperature set between 12ºC to 14ºC. The below chart is an indicative temperature chart to indicate the best temperature for drinking purposes. Wine Serving temperature Champagne NV, Sparkling, Spumante 6ºC Dry White Semillon, Sauvignon Blanc... -
Page 20: Defrosting/Condensation/Hygrometry/Ventilation
if the temperature of your wine cellar is constant (between 12ºC to 14ºC) your wines will be stored in perfect conditions. Not all wines will improve over the years. Some should be consumed at an early stage (2 to 3 years) while others have tremendous ageing capability (50 and over). All wines have a peak in maturity. -
Page 21: Adjustable Wooden Shelves
ADJUSTABLE WOODEN SHELVES Shelf installation and taking instruction: Common wooden shelf: Shelf taking: According to below instruction drawing to press one side of shelf limit pin①, extract and remove the shelf from the other side of support bracket②, then take off the shelf following the arrow mark ③. Shelf installation will be opposite with shelf taking. - Page 22 • Depending on to the model and the type of handle your wine cabinet is equipped with, you may have to rotate the door through 180 degrees. Depending on the type of handle your wine cabinet is equipped with, the door •...
- Page 23 1.Decorative nail 2. Knife 3. Drop-proof device 4. M5 six angle 5. M5 six angle screwdriver 6. Door spindle core 7. Upper door hinge 8. Lower door hinge...
- Page 24 WU3082T-2B17/ WCU6082T-2B39 Warning: To avoid accidents during the process of changing the door, we recommend that you get assistance. The glass door is heavy and may cause damage once it drops. 1. Put the cabinet on open operation place, keep the door opened with maximum angle.
- Page 26 WU6082H-2P39 1. 1.Put the cabinet in an open operating area, have the door opened to the maximum angle. 2. Use the knife ② to remove the decorative nails① from the left side of the cabinet. (Figure 1) 3. Use the Phillips screwdriver④ to remove the M5 Phillips countersunk screw③ that fix the upper and lower door hinges.
- Page 27 4. Rotate the door by 180 degrees and install it to the other side of the cabinet. (Figure 3 and 4) 5. At last, install all decorative nails to the other side of the door①, door installation is all set! (Figure 5)
-
Page 28: Operating Instructions - Auto-Door
AUTO-DOOR OPERATING INSTRUCTION WU3082T-2B17/WU6082T-2B39 1. Operate the auto-door in the power-on state. 2. Locate the touch point on the door. Place your finger on the touch point and keep your finger on the point for a few seconds until the door opening sensor is activated. -
Page 29: Installation - Ventilation Frame
Note: When opening the door manually, the system can activate the opening sensor, when the door is closed. If this happens, the appliance will automatically re-open the door. Therefore, you should always check the door closing after manual door opening. If the door opens, wait until the push function is retracted before closing the door. -
Page 30: Operation Abnormalities
OPERATION ANOMALIES Ensure that there is power to the electrical supply plug by connecting another electrical appliance to it. Check fuse, if any. Make sure that the door is closed properly. If your wine cellar appears to be malfunctioning, unplug it and contact your after sales service. -
Page 31: Troubleshooting Guide
TROUBLESHOOTING GUIDE Common problems may easily be solved, saving you the cost of a possible service call. Please carefully read the instruction manual and revert to troubleshooting guide chart. PROBLEM POSSIBLE CAUSE Wine cellar Not plugged in. does not The appliance is turned off. operate. -
Page 32: Before Disposal Of The Appliance
BEFORE DISPOSAL OF THE APPLIANCE. 1. Disconnect the main plug from the main socket. 2. Cut off the main cable and discard it.
Need help?
Do you have a question about the WCU3082-1BG and is the answer not in the manual?
Questions and answers