Table of Contents
Advertisement
Advanc t Operating with the Reméte Commander
sdmels|aclactaaltatemiiclarel wey a Ohdel-lawstelelloyAtale(=re)
Equipment with RM-P741
1
Set the mode selector to LEARN.
The RM-P741 can learn various functions of other remote
{~ [ean
commanders emitting infrared rays and allows you to
control most of audio and video equipment from a distance.
'
Insert batteries before operation.
2 select the equipment to be learned with
the MODE button.
3, 4 PROGRAM
3
Press and hold the button until the LEARN
indicator lights up.
c>
en
a
as
RM-P741
4
While pressing the button on RM-P741
which is selected in step 3 press and hold
the button of other manufacturer's
remote commander until the LEARN
indicator goes off.
The learning is completed.
Other manufacturer's
remote commander
The two remote commanders must:
* be placed straight and head to head.
* be placed at a distance of approx. 5 cm (2 inches).
¢ not be moved during the programming operation.
5
Repeat 2 and 4 for each button to be
programmed.
6
Set the mode selector to USER STD or SONY
STD to control equipments.
USER STD
Other manufacturer's
remote commander
SONY
STD
wT
After programming
Be sure to test if the equipment really works with the
programmed signals.
Approx. 5 cm
(2'thches)
Programmable
SS
Number of signals that the commander can learn
Bene
oman
i
It depends on the format of the signal. If you program
'
signals of Sony equipment, approximately 30 — 40 signals can
;
be programmed.
|
Advertisement
Table of Contents
