• "Rear I/O cover" on page 54.
• "System board shield" on page 55.
• "VESA mount bracket" on page 57.
Removal steps
Screw (quantity)
SCRW M3X4MM*D6 FLH NYLOK(2)
GPU card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the following parts in order, if any:
• "Computer stand" on page 51.
• "Rear I/O cover" on page 54.
• "System board shield" on page 55.
• "VESA mount bracket" on page 57.
Torque
3 ± 0.5 lb/in
.
Chapter 6
Hardware removal and installation
65