Screw (quantity)
SCRW M2 CAP L4 NI(1)
Thunderbolt card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the following parts in order, if any:
• "Computer stand" on page 51.
• "Rear I/O cover" on page 54.
• "System board shield" on page 55.
• "VESA mount bracket" on page 57.
• "M.2 solid-state drive" on page 61
Removal procedure
62
M90a Pro Gen4 Hardware Maintenance Manual
Torque
1.5 ± 0.5 lb/in