Grizzly ARM 4040 Lion Set Original Instructions For Use page 24

GB
open sandals.
Do not wear loose clothing or
clothes that straps or belts sus-
pend from.
• Before use, always perform
a visual inspection to check
whether the cutting blades,
fastening bolts and the whole
cutting unit are worn out or
damaged. Damaged or worn
cutting blades and fastening
bolts must only be replaced
as a set to prevent imbalance.
Worn or damaged information
signs must be replaced.
• Never use the lawnmower with
damaged protective equipment
or protective grating or without
installed protective equipment,
e.g. deflector plates and/or
grass collection equipment.
• Take care with equipment that
has several cutting tools, as
the movement of one blade
may result in the rotation of the
other blades.
• Use only spare parts and ac-
cessories supplied and recom-
mended by the manufacturer.
The use of non-original parts
will immediately invalidate the
guarantee.
• Worn or damaged information
signs must be replaced.
Working with the Equipment:
Do not place feet or hands
near or under rotating parts
when working. Risk of injury!
• Switch on the motor accord-
ing to the instructions and only
when your feet are at a safe
24
distance from the cutting tools.
• Do not use the equipment in
the rain, in poor weather, in a
damp environment, or on wet
grass. Work only in daylight or
with good lighting.
• Do not work with the equipment
when tired, lacking concentra-
tion or under the influence of
alcohol or drugs. Always take
breaks in good time. Take a
sensible approach to the work.
• When working, ensure a firm
stance, particularly on slopes.
Always work across the slope,
never upwards or downwards.
Take particular care when
changing the direction of travel
on the slope. Do not work on
excessively steep slopes.
• Run the equipment only at a
walking pace. Take particular
care when turning the equip-
ment around, pulling it towards
you or going backwards.
• Switch on the equipment care-
fully and in accordance with
the directions in these instruc-
tions. Ensure sufficient distance
between feet and the rotating
blades.
• Do not tilt the equipment when
starting other than if it is nec-
essary to do so when starting
up in long grass. In this case,
tilt the equipment by pressing
down the handle bar such that
the front wheels of the equip-
ment are raised. Always check
that both hands are in the work-
ing position before returning
the equipment to the ground.
• Do not work without the grass
bag or collision guard. Keep