Safety Information; Symbole And Pictorial Diagrams - Grizzly ARM 4040 Lion Set Original Instructions For Use

GB
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another. The
stated vibration emission value may also
be used for a preliminary exposure as-
sessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched
on but running without any load).

Safety Information

This section covers the basic
safety regulations when working
with the device.
Symbole and Pictorial
Diagrams
Pictorial Diagrams on the
Equipment:
Caution!
22
Read the operating instruc-
tions carefully.
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the ignition key
before adjustment or repair
work or if the power cable is
caught or damaged.
Warning! Electric shock haz-
ard
Do not use on inclines
Do not work in the rain and
do not cut wet grass.
Caution! The lawnmower
blade continues to run after
switching off.
To stop the device,
release the safety switch
Protection class
III
Noise level specification
L in dB
WA
POWER Battery Indicator