Troubleshooting - Cuisinart MINI PREP PRO Q158A Manual

Chopping nuts
You can use either the 'Chop' or 'Grind' function depending on the consistency you require. For
roughly chopped nuts, process continuously using the 'Chop' switch until chopped to the desired
consistency. Check frequently to avoid nuts clumping together. If necessary, use the spatula to re-
distribute the nuts evenly in the work bowl. If you require more of a powder consistency use the
'Grind' function continuously until the desired consistency is achieved.
Producing a purée
Cut the food into 1.5cm pieces and place in the work bowl. Use the 'Chop' switch and a 'pulse'
action to chop coarsely, then process continuously until food is puréed.
N.B. Cooked potatoes are an exception to this procedure. They develop a gluey texture when
processed with the metal blade.
Grinding coff ee beans and hard foods
Add coff ee or hard food to the work bowl. Use the 'Grind' switch and process using a continuous
action until desired consistency is reached. Coff ee beans may take slightly longer to process, so
use a pulse action every 10 seconds or so to allow the beans to drop to the bottom of the work
bowl.
Adding liquid
You can add liquids such as water, oil or fl avouring while the appliance is running. Pour the liquid
through one of the two openings in the lid.
N.B. Add liquid through only one opening at a time. The other opening must be left free for air
to circulate.

5. TROUBLESHOOTING

Motor does not start or blade does not rotate:
Check that the plug is securely inserted into the mains.
Check that the work bowl and lid are securely locked into place (see section A for more information).
Ensure only one control switch is being pressed at a time.
Food is unevenly chopped:
Either you are chopping too much food at one time, or the pieces are too large. Try cutting food
into smaller pieces of an even size and processing a smaller amount per batch.
Food is chopped too fi ne or is watery:
The food has been over-processed. Use brief pulses or process for a shorter period of time.
Food collects on lid or sides of work bowl:
You may be processing too much food. Turn the appliance off . When the blade stops moving
remove the lid and clean the work bowl and lid with the spatula. You can also reverse the motor
by alternating between 'Chop' and 'Grind' . This will help to combine the ingredients and clean the
sides of the work bowl.
Food gets stuck on blade:
You may be processing too much food. Turn the appliance off . When the blade stops moving,
carefully remove it. Remove food from the blade and work bowl using a spatula, and start again.
23