Techart 100.096.180.009 Mounting Instructions page 2

MOUNTING INSTRUCTIONS
T T – Front spoiler I
ECHAR
for Porsche 996 Turbo / 4S
Art.No.: 100.096.180.009
1. Detach original front spoiler
1.1 Remove the fixing bolts on the left and on the right from the front spoiler.
1.2 Imprint the locking noses with help of a screwdriver and take off the front
spoiler at the same time outward.
2. Install TECHART- front spoiler
2.1 Remove fixing bolts of the original bug lining. Insert the TECHART front
spoiler into the guidance of the original spoiler and align it at the air
intakes.
Importantly:
2.2 Mark assembly position on the left and on the right. (see sketch) Remove
protection foil at the side flanks and press in slightly.
2.3 Seal the TECHART front spoiler to the bug lining with attached sticking
sealant.
2.4 Fasten front spoilers to the inner wheel runs (on the left and on the right)
and to the original points of screw connection.
Watch out of exact aligning.
MADE
IN
GERMANY