Additional Information; Disc Care - Pioneer DV-525 Operating Instructions Manual

Disc Care
HOW TO HOLD DISCS
When loading or removing discs, try not to touch their
playing surfaces.
CLEANING
Fingerprints or other dirt on the disc may affect sound
and picture quality.
To clean your discs, use a soft clean cloth to wipe them.
tf necessary, moisten a soft cloth with diluted neutral
detergent to remove heavy dirt or fingerprints.
Do not wipe in a circular
direction (Concentric
scratches in the disc groove
t_nd to cause noise,)
Gently wipe _'om the
inside toward the outer
edge,
Discs must not be cleaned with record cleaning sprays,
or static prevention sprays, etc, Also do not use volatile
liquids such as benzine, or thinner, etc,
LENS CLEANER
The player's pickup lens should not become dirty in
normal use, but if for some reason it should malfunction
due to soiling, contact your nearest PIONEER authorized
service center. Lens cleaners are commercially available,
but special care should be exercised in their use since
some may cause damage to the lens.
NEVER PLAY CRACKED OR WARPED DISCS
The disc revolves in the player at highspeed when it is
played.Never playa cracked, scratched or warped disc.
Thismay damagethe playeror cause it to malfunction.
NEVER USE DISCS WITH SPECIAL SHAPES
CD's with special shapes (heart-shaped CDs, octagonal
CDs, etc.} cannot be played on this set.
Attempting to do so may damage the set Do not use
such CDs.
AFTER USING DISCS, STORE THEM UPRIGHT
After playing a disc, always remove it from the player
and return it to itsjaeket. Then store it standing upright
away from heat and humidity.
• Store discs carefully. If you store discs at an angle, or
stacked on top of each other, discs may become
warped even when in theirjackets.
• Do not leave discs in locations such as the seat of a
car, which may become excessively hot.
#
CAUTION WHEN USING THE DISC I
All rights reserved,
Unauthorized public performance, broadcasting or
copying is a violation of applicable laws,
Notes on using optical cables
• Do not route cords around sharp angles. When ,_
storing, wind the cords so that they have a diameter i--
of at least 15 cm (6 in.).
• When connecting, push all the way into the terminal.
• Do not use cords with a length of over 3 m.
- If moisture or dust has collected on the plug, wipe it
with a soft cloth before connecting.
- 15 ©m(6 in.) dia, _
Z
49