Electrical shock can cause injury. Do not use on live electrical circuits. SAVE THESE INSTRUCTIONS Disclaimer Operation of DTC is not warranted in an EU member state if operating instructions are not in that State’s language. Contact CDI Torque Products if a translation is needed.
±1% ±1% of reading, 10% to 100% of full scale Dimensions: Length / Weight Model Length Width Depth Weight 2503-F-DTC 13.2 in. 4.75 in. 2.2 in. 4.9 lbs. DTC Range TORQUE: (Display Range and Resolution as shown below) Model...
Page 4
User Instructions Basic Functions (Quick Start) BATTERY TORQUE DISPLAY CONDITION ON/OFF 1.PEAK FT-LBS RE-ZERO INCREMENT BUTTON BUTTON PEAK TORQUE DECREMENT RECALL BUTTON BUTTON UNITS BUTTON MODE SELECT, MENU ENTRY AND ENTER BUTTON ½ ⅜ ” x ” AUDIBLE ALERT Socket Adapter ½...
Page 5
Menu Selections: o EXIT - Exits Main menu and returns to torque screen. o CYCLE COUNT - Displays torque cycle count screen. o SETTINGS - Displays DTC settings menu. o CALIBRATION – Displays password screen (see Calibration manual). 3. To exit Main menu and return to torque measurement screen, press ENTER button while ...
Press Press EXIT ENTER Press ENTER ENTER PASSWD INVALID ID PASSWD CYCLE COUNT ENTER button Button PRESS TO EXIT 0 0 0 0 SETTINGS button to EXIT CALIBRATION Calibration Menu Selection Enter Password Screen Invalid Password Screen Battery Replacement Replace with three "AA"...
Clean DTC by wiping with a damp cloth. DO NOT use solvents, thinners or carburetor cleaners. DO NOT immerse in anything. Service, repair and calibration are to be done by CDI Service Center only. Contact your CDI Torque Products representative. CALIBRATION Contact your CDI sales representative for calibration services.
Page 12
19220 San Jose Ave. City of Industry, CA 91748 Phone: 626-965-0668 Fax: 626-965-2410 Email: sales@cditorque.com Website: www.cditorque.com Made in USA with US and Global Components Snap-on Tools Company Kenosha, WI 53141-1410 USA Printed in USA 20-3325-CDI REV. - 14-10...