IV. MAINTENANCE - EVERY 3 MONTHS
WARNING
Shut OFF all electrical power and lock/tag out
the switch before attempting maintenance work.
NOTE:
It is
recommended that the 3-month
maintenance be performed by an authorized Middleby
Marshall technician.
A. Electrical Terminals
Open the control cabinet door by removing the two
screws from the control cabinet door. Tighten all
electrical control terminal screws including the
electrical contactor terminal screws as shown in Figure
26.
B. Ventilation
Check that the air circulation throughout the oven is
not blocked and is working properly.
V. MAINTENANCE - EVERY 6 MONTHS
A. Vent Check
Check your venting system.
Installation of replacement parts requiring access
•
to the interior of the oven is permitted only by an
authorized service technician.
•
If there are any problems with the operation of the
oven, the authorized service technician must be
called.
Obtain a service contract with a manufacturer's
•
authorized service technician.
VI. KEY SPARE PARTS KIT
An oven can be purchased with a Key Spare Parts Kit
(Figure 28 or Figure 29). (The kit can be purchased
when the oven is ordered, or later, from a Middleby
Marshall Authorized Parts Distributor). The kit contains
many of the crucial parts that can reduce serious
downtime and loss of production if a failure occurs.
Replacement parts for these kits can be purchased
from your Middleby Marshall Authorized Parts
Distributor.
49
SECTION 4
MAINTENANCE
NOTICE