[ To setup the network ]
1. Switch on the router and switch on its DHCP setting.
2. Connect the router to this monitor with an Ethernet cable.
3. Press
HOME button and 1688 on the remote control, then select Settings.
4. Select "Network & internet", then press OK button.
5. Select "Ethernet", then press OK button.
6. Follow the on-screen instructions to install the network.
NOTE
Connecting with a shielded CAT-5 Ethernet cable to comply with the EMC directive.
PC
COMPUTER SETTING
Signal Timing
Change to the desired signal timing listed on page 67: COMPLIANT TIMING.
26 BEFORE YOU OPERATE THE MONITOR
INTERNET
ROUTER
[RJ-45]
Monitor
[RJ-45]