Advertisement
grinding mill
To ensure the long life of your grinding mill, never run for longer than 60
l
seconds. Switch off as soon as you have got the right consistency.
Do not process turmeric root as it is too hard and may damage the blades.
l
slicing/grating disc
Never remove the lid until the cutting disc has completely stopped.
l
Handle the cutting discs with care - they are extremely sharp.
l
centrifugal juicer
Do not use the juicer if the filter is damaged.
l
The cutting blades on the base of the filter drum are very sharp, take care
l
when handling and cleaning the drum.
Only use the pusher supplied. Never put your fingers in the feed tube. Unplug
l
before unblocking the feed tube.
Before removing the lid, switch off and wait for the filter to stop.
l
before plugging in
Make sure your electricity supply is the same as the one shown
l
on the underside of your appliance.
Important – UK only
The wires in the cord are coloured as follows:
l
Blue = Neutral, Brown = Live.
The appliance must be protected by a 13A approved (BS1362)
l
fuse.
Note:
For non-rewireable plugs the fuse cover MUST be refitted when
l
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
If a non-rewireable plug is cut off it must be DESTROYED
l
IMMEDIATELY. An electric shock hazard may arise if an
unwanted non-rewireable plug is inadvertently inserted into a 13A
socket outlet.
This appliance conforms to EC Regulation 1935/2004 on
l
materials and articles intended to come into contact with food.
before using for the first time
1 Remove the plastic blade covers from the knife blade. Take
care the blades are very sharp. These covers should be
discarded as they are to protect the blade during manufacture
and transit only.
2 Wash the parts see "care and cleaning".
key
processor
pusher
1
feed tube
2
lid
3
bowl
4
detachable drive shaft
5
power unit
6
speed/pulse control
7
safety interlocks
8
cord storage (at back)
9
A plastic blender
blade assembly
sealing ring
goblet
m
filler cap
lid
o
B glass blender
blade assembly
sealing ring
goblet
m
filler cap
lid
o
C - standard attachments
knife blade
p
dough tool
q
dual whisk
r
4mm slicing/grating disc
s
2mm slicing/grating disc
t
extra fine grating disc
c
attachments
Not all of the attachments listed below may be included with
your food processor. Attachments are dependent upon the
model variant. Refer to "service and customer care" section for
information on how to buy an attachment not included in pack.
D - optional attachments
citrus juicer (if supplied)
c
centrifugal juicer (if supplied)
cm
multi mill
(if supplied)
jar
c
sealing ring
co
blade assembly
cp
grinding mill
(if supplied)
mill lid
cq
grinding mill blade assembly
cr
4
(if supplied)
(if supplied)
Advertisement
