Table of Contents
Advertisement
6
UNIT CONTROL WIRING METHOD
6.1 Control Wiring Method
Bundle the unit control wires (the wires connected to the control terminal block) with easy locks.
(1) Attach the easy locks to the unit.
(2) Bundle the control wires with the easy locks.
Bundle the control power supply wires separately from other wires.
6.2 Grounding
As the unit is designed to be installed in the distribution panel cabinet, the ground terminal at
the bottom of the unit is not intended to be used as a main circuit ground terminal.
To ground the unit using its ground terminal, connect a wire with a diameter of 1.25 mm and
fasten it with the included ground terminal connection screws (M4 × 8).
29
Advertisement
Table of Contents
