Casio SF-4300B Owner's Manual page 21

ay
38
PART 3 Data Management Functions
JUL"2971994 FRI
$:00rRaWORK
ALM 7:245A
a
Time data
Schedule alarm
indicator
as that for the schedule data time.
Using the Schedule Keeper So
« If you attempt to set a schedule alarm time that is already passed, the
_message "ALARM TIME ALREADY PASSED!" appears on the display.
Then the data is stored without a schedule aiarm,
e Ifyou attemptto seta schedule alarm time thatis already set for another data
entry, the message "ALARM TIME ALREADY USED!" appears on the
dispiay. Press ESC, [> or <J to display the schedule alarm to change it.
To switch schedule alarms on and off
1. Press FUNC.
2. Press 4 to select the SOUND menu item.
3. Use A and V to select SCHED AL.
4. Use <l.and > to switch Schedule Alarm on and off.
5. Press SET to store your setting and clear the SOUND menu.
To set or change a schedule alarm for an existing data entry
1. Enter the Schedule Keeper and recall the data for which you want to set or
change a schedule alarm. And then press FUNC 7 io enter the
edit mode.
Press [> unti! the schedule alarm time appears.
Input the schedule alarm time. Use the <] and > cursor keys to move
between the hour and minutes setting.
Whenever the schedule alarm setting is shown on the display, pressing DEL
clears the alarm time and displays the prompt "ALM TIME?". Input the alarm
time using the same procedure described above.
After inputting the data, press SET to store it into memory.
Note that the schedule alarm setting is cleared from the display when you
press SET.
aed
-
To view a data entry's current schedule alarm setting
1. Enterthe Schedule Keeper and recall the date whose schedule alarm setting
you want to view.
Press SHIFT NEXT to switch the index display to show the schedule alarm:
settings for all entries stored under the date you are viewing.
. Use A and V to scroll through the entries and view the alarm times.
To clear the schedule alarm times, press SHIFT NEXT again.
ed
wo