Adjusting The Picture - HP F1905E Series Service Manual

3.3 Adjust the Picture
Brightness
1.
2. Contrast
Image
3. Control
4. Color
5. Language
6. Management
7. OSD Control
8. Information
Factory
9.
Reset
10. Exit
Adjust the brightness.
Adjust the contrast
Adjust the:
Auto Adjustment: Adjusts the main settings and produces a stable, centered
image.
H-Position: horizontal position of the screen image.
V-Position: vertical position of the screen image.
Clock: frequency of the pixel clock to minimize vertical bar.
Phase: phase value to minimize horizontal jitters.
9300K: recall 9300K color
6500K: recall 6500K color
SRGB: recall SRGB color
Custom Color: adjusts the color tint of white, and the red, green, and blue (RGB)
mix for colors.
Shows the language of the OSD window.
Power Saver: enable/disable power saving
Power On Recall: enable/disable power recall
Mode Display: enable/disable mode display
Sleep Timer: set sleep timer
Basic Menu: set to basic menu
OSD (on Screen Display) settings: adjusts the H/V position, timeout, On Screen
Display window.
Current setting, recommended setting, serial number, total hours, backlight hours,
Exit.
Resets the display to original factory settings for color, brightness, phase, and clock.
Exit the current OSD window.
8
HP F1905E