HP F1905E Series Service Manual page 41

d) Test white-balance again after Auto Level. Adjustment with hand is necessary if it is beyond the specs just the
same.
e) Select 7x00 item to adjust cool color-temperature and select 6x00 to adjust warm color- temperature. It can
reach to the best effect through adjusting R/G/B value if it inclines to green or blue.
f) Select Exit to the upper menu after completing the adjustment. Then press POWER OFF to exit and save it.
Ⅲ. Steps for writing DDC：
1. Employ PC, and connect the DDC-writing instrument and the instrument that is ready for writing into DDC
to the power of 12v. Connect the signal cable of the latter to D-USB or DVI of DDC-writing instrument (The
data-writing of monitor needs transfer-interface) and link the DDC-writing instrument with PC through printer
interface. (See the schematic picture below)
Connection of DDC-writing instrument for
2. Seek the document with the expanded name of .BAT in DDC file of this model. It appears the indication of
"Input Serial No.：＂after dual-click the document to be ready for DDC-writing.
41
HP F1905E