Table of Contents
Advertisement
3.2
Connecting to PC/Force Recovery Mode
Step 1:
On the Host computer, open Linux terminal and enter the following command to
extract the compressed BSP image files (BSP file name may vary):
$ sudo tar -zxvf BOXER_8651AI_J5.1.1_A00_1.0.2_20230822.tar.gz
Note: Do not decompress the file (Internal.tar.gz) using a Windows OS, BSP should only
be decompressed in a Linux EXT3/4 file system.
Step 2:
Perform the following actions to force the system to start in USB Recovery Mode:
1.
Connect the Micro-USB plug on the USB cable to the Recovery Port on the
BOXER-8651AI and the other end to an available USB port on the Host PC.
2.
Connect the BOXER-8651AI power supply.
Chapter 3 – BSP Flash Guide
32
Advertisement
Table of Contents
