PSC PSRF-1000 System Manual page 53

RF Beep
Duration
Systems Manual
The duration of time that an ACK beep is sounded is selectable using
this setting. RF beep duration can be set in increments of 10 ms (toler-
ance of +/- 10%) from 0 to 2.55 seconds.
SET -------------------------------------------
Set RF Beep Duration ---------
Scan three digits representing the desired duration using the
Number Pad in Appendix B, padded with leading zeros (example:
008 = 80ms, 025 = 250ms, 100 = 1 second, etc.), then scan the
END bar code.
END ------------------------------------------
Feature is specific to scanner ONLY
49