Steps
1. Replace the power button with fingerprint reader into its slot in the computer.
2. Secure the power button with fingerprint reader to the computer using the two (M1.6x1.7) screws.
Next steps
1. Install the
system
board.
2. Install the
heatsink
assembly.
3. Install the battery.
4. Install the
WWAN
card.
5. Install the
solid-state
6. Install the
base
cover.
7. Install the
SIM
card.
8. Install the
microSD
card.
9. Follow the procedure in
Keyboard
Removing the keyboard
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the
solid-state
5. Remove the
WWAN
card.
6. Remove the battery.
7. Remove the
heatsink
8. Remove the
audio
board.
drive.
after working inside your
before working inside your
card.
drive.
assembly.
computer.
computer.
Removing and installing components
53