Installing The Power Button With Fingerprint Reader - Dell P133G Service Manual

2. Remove the microSD
3. Remove the SIM card.
4. Remove the base cover.
5. Remove the solid-state
6. Remove the WWAN card.
7. Remove the battery.
8. Remove the heatsink
9. Remove the system board.
About this task
The following images indicate the location of the power button with fingerprint reader and provide a visual representation of the
removal procedure.
Steps
1. Remove the two (M1.6x1.7) screws securing the power button with fingerprint reader to the computer.
2. Lift and remove the power button with fingerprint reader from the computer.

Installing the power button with fingerprint reader

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the power button with fingerprint reader and provides a visual representation of
the installation procedure.
52 Removing and installing components
card.
drive.
assembly.