Related Manuals for NookBox P119076
Summary of Contents for NookBox P119076
- Page 1 NookBox Installation Guide NB Camera PIR Detector Outdoor Installation Guide NB Camera PIR Detector Outdoor (P119076 / E6310378)
- Page 2 Besides, the detector is designed with the digital proximity detector. The anti-masking feature allows for detection of any attempts to blind the detector by placing objects in its field of view. The detector is also compatible with NookBox Repeater, which can further extend the RF communication range into hard-to-reach areas.
-
Page 3: Identifying The Parts
NookBox Installation Guide NB Camera PIR Detector Outdoor Identifying the Parts 1. Digital Proximity Detector The digital proximity detector is used to detect any masking (blocking) attempt by an intruder. 2. LED Indicator (RED) The LED indicator is used to indicate the system status. -
Page 4: Led Indicator
NookBox Installation Guide NB Camera PIR Detector Outdoor Features LED Indicator When enabled, the LED Indicator will light up in the following conditions: • When the Tamper Switch is triggered, the LED will flash for 2 seconds to indicate it is transmitting “Tamper” signal. - Page 5 NookBox Installation Guide NB Camera PIR Detector Outdoor DIP Switch Position Table The function of each DIP Switch is listed in the table below. The DIP Switch is either ON or OFF. Top position indicates ON and bottom position indicates OFF.
-
Page 6: Remote Setting
NookBox Installation Guide NB Camera PIR Detector Outdoor Remote Setting • The PIR motion sensor camera supports remote setting of double knock function, sensitivity and pet immunity. • When the PIR camera is powered on, its double knock function is determined by DIP SW7 setting, sensitivity is determined by DIP SW5 &... - Page 7 NookBox Installation Guide NB Camera PIR Detector Outdoor Anti-Masking • The PIR Camera has a digital proximity detector that can detect any masking (blocking) attempt by an intruder. • When a masking event is detected, and the masking condition lasts for 3 minutes, VST-892EX will send a masking alarm signal to the Control Panel to notify user of the masking condition.
- Page 8 NookBox Installation Guide NB Camera PIR Detector Outdoor Edit PIR Camera Operation Area Follow instruction below to change PIR Camera Area in the Control Panel. Use the panel Edit Device function to change PIR Camera area setting. 2) Press and hold the Test button for 3 seconds on the PIR Camera to send a signal to the panel, and then release the button when the LED lights up.
- Page 9 NookBox Installation Guide NB Camera PIR Detector Outdoor Mounting with mounting bracket and rotating holder: A rotating holder is provided as a user friendly mounting option (optional item, sold separately). It is comprised of a base to fix to surface, and a swivel ball to fix to mounting bracket and 892EX.
-
Page 10: Installation Recommendations
NookBox Installation Guide NB Camera PIR Detector Outdoor To mount 892EX with mounting bracket and rotating holder: Fix the rotating holder to the wall with provided screws. 2) Fix the mounting bracket on the swivel ball with the fixing screw secured through the foolproof design hole. - Page 11 NookBox Installation Guide NB Camera PIR Detector Outdoor Limitations: • Do not install the PIR Camera completely exposed to direct sunlight. • Avoid large obstacles in the detection area. • Do not point directly at sources of heat, such as fires and boilers, or install above radiators.
- Page 12 NookBox Installation Guide NB Camera PIR Detector Outdoor • Avoid looking directly at the path of outdoor unit’s intake or exhaust airflow. <IMPORTANT NOTE> • Adjust the Dip Switches according to the installation location of the PIR Camera for ideal performance. If Dip Switch settings does not match with installation environment, the PIR Camera’s performance will be hindered and may cause either false alarm or inability...
- Page 13 NookBox Installation Guide NB Camera PIR Detector Outdoor For more information visit: www.getnookbox.com...