Related Manuals for NookBox IR 360 Detector
Summary of Contents for NookBox IR 360 Detector
- Page 1 NookBox Installation Guide IR 360 Detector Installation Guide NookBox IR 360 Detector (P119044 / E6309679)
- Page 2 NookBox Installation Guide IR 360 Detector NookBox IR 360 Detector (P119044 / E6309679) The Dome Detector is designed to be mounted on the ceiling to provide a 360o detection coverage without blind spots to pick up movements within an assigned area and signals the Control Panel to activate the alarm if an intruder crosses its’...
-
Page 3: Identifying The Parts
NookBox Installation Guide IR 360 Detector Identifying the parts 1. Test Button aka LED indicator PIR Main Body The test button and also doubles as the LED indicator. The test button is used for testing the radio performance and for learning purpose. The LED indicator is used to indicate the status of system. -
Page 4: Led Indicator
NookBox Installation Guide IR 360 Detector LED Indicator In Normal operation mode, the LED Indicator will not light except in the following situations: • When the Detector is in low battery condition, every time it transmits a detected movement, the LED will light up for about 2 seconds. -
Page 5: Tamper Switch
NookBox Installation Guide IR 360 Detector Battery The Detector uses 1 CR123A lithium 3V battery The batteries are included in the package. The Detector feature low battery detection function. A low battery signal will be sent to the Control Panel along with regular signal transmissions for the Control Panel to display the status accordingly. - Page 6 NookBox Installation Guide IR 360 Detector Installation Guideline • The Detector is designed to be mounted on the ceiling • When mounted at 2.7 meter height, the Detector provides detection coverage of a 360° circle wth approximately 6 meter diameter.
-
Page 7: Mounting Method
NookBox Installation Guide IR 360 Detector Mounting Method • The Detector is designed to be mounted on the ceiling • The back cover has 4 knockouts where the plastic is thinner for ceiling mounting. • After finishing Detector learning and walk test, proceed to mount the Detector according to instructions below Break through the 4 knockouts on inside of back cover Use the knockout hoes as template, drill holes in the ceiling, insert wall plug if required. - Page 8 NookBox Installation Guide IR 360 Detector For more information visit: www.getnookbox.com...