Summary of Contents for NookBox SVGS-1
- Page 1 NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor...
- Page 2 SVGS-1 Shock, Vibration & Glass Break Sensor SVGS-1 Shock, Vibration & Glass Break Sensor SVGS-1 is a Shock, Vibration/Glass Break Sensor. It is capable of sending wireless signals to the Control Panel upon detection of window glass break or shock/vibration.
-
Page 3: Parts Identification
NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor Parts Identification 1. Learn/Test Button Using sharp tools such as paper clip to press the button and transmit Learn/Test code. 2. LED Indicator The LED flashes when: The Learn/Test button is pressed. - Page 4 NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor Features Battery and Low Battery Detection The Sensor use one CR2032 3V Lithium battery as its power source. Please note: ALWAYS replace battery with the correct • size and voltage.
- Page 5 NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor Supervision The Sensor will transmit a supervision signal to report its condition regularly according to the user’s setting. The factory default interval is 30-40 minutes. The user can also press the Function Button once to transmit a supervision signal manually.
- Page 6 NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor Learning and Installation Learning Pull out the battery insulator power on the sensor. 2. Refer to Control Panel manual to put panel into learning mode. 3. Presses the Learn/Test button once to transmit learn code.
- Page 7 NookBox Installation Guide SVGS-1 Shock, Vibration & Glass Break Sensor For more information visit: www.getnookbox.com...