Repeating A Single Track; Timer Playback - Harman Kardon HD7225 Owner's Manual

although you can still hear the speeded-up sound. To switch to
rapid but inaudible search, press the PAUSE button before
using the SEARCH button. Then to resume playback, press
either PAUSE or PLAY.
Programming a sequence of tracks
The unit will memorize a sequence of up to 30 tracks and
then play them back in the order they were programmed, Your
programmed sequence can be 30 different songs or a
combination with individual songs repeated several times as
part of the sequence.
1. Load a disc into your CD player.
2. Press the PROGRAM button cither on the front panel or
on the remote control. The red PROG indicator in the display
lights up and the INDEX light goes out.
3. Select the first track by cither pressing its number on the
remote control keypad or using the front panel or remote
control SKIP buttons. If you select the track using the skip
buttons, you must then press the PROGRAM button on the
front panel or on the remote control to enter the number of the
selected track. The number of that track appears in the display
along with its time. The indicator to the right of the TRACK
indicator (where the INDEX number is displayed in non-
PROGRAM mode) displays the total number of selections that
you have programmed.
4. Select the next track of your desired sequence in the
same way as described in Step 3. The display indicates the
track number as well as the cumulative playback time in your
sequence (the time of this track added to the time of the
previous track).
5. Continue until up to 30 tracks have been programmed.
To repeat a track, simply enter its number again to add it to the
selection. If you want to delete the last track selected, press the
CLEAR button. The track will be deleted and its time will be
subtracted from the total playback time display. Each time you
press CLEAR, the most recently programmed track will be
deleted. To clear an entire programmed selection, press the
STOP button twice. Then start over from step 2, above. To
check the time of the tracks in the programmed sequence, press
the CHECK button. Each time you press the CHECK button,
the next higher track in the sequence will be displayed along
with the cumulative playing time of all tracks checked to that
point. After all tracks have been checked, a final press of the
button will display the total playback time of the programmed
sequence.
6. When you are finished programming, press the PLAY
button. The unit will begin playing on the first track you
programmed and continue playing tracks in the order
programmed.
¢ During playback of a programmed sequence, you can use
the SKIP and SEARCH functions without cancelling the
program. SKIP will jump to the beginning of each track in the
programmed sequence, and SEARCH will scan quickly
through each track in the programmed sequence.
e To stop playback of a programmed sequence, press STOP
once. The sequence remains programmed, and you-can add
morc tracks to the program at this point. Press PLAY to start
playback again.
© To stop playback of a programmed sequence and cancel
the program, press STOP twice. The PROG light in the display
goes out.
Repeating the entire CD or programmed
sequence
1. Press the REPEAT button either on the front panel or on
the remote control. The REPEAT indicator in the display lights
up.
e You can press REPEAT at any time cither before or
during playback. When the unit is in REPEAT mode, it will
continuously play the entire CD or the programmed sequence.
¢ To turn off REPEAT mode, press the REPEAT button
again. If you turn off REPEAT during playback, the unit will
continue to play until the end of the disc or programmed
sequence.
¢ You can use both SKIP and SEARCH functions as usual
when in REPEAT mode.
Repeating a single track
1. Press PROGRAM.
2. Select the desired track by either pressing its number on
the remote control keypad or using the front panel skip buttons.
3. Press REPEAT.
4. Press PLAY. The track will be repeated continuously
until you turn off REPEAT.
Repeating a "phrase" or section of the disc
The unit allows you to repeat any continuous section of the
disc from a specified starting point (A) to a specified ending
point (B).
1. Press PLAY.
2. When you hear the point where you want to begin your
"phrase", press the A-B button on the remote control, Pressing
this button marks point A (the starting point of the phrasc), The
REPEAT indicator in the display will light and the disc
continues to play.
3. When you hear the point where you want your phrase to
end, press the A-B button again. The A-B indicator in the
display will light. The unit is now in A-B mode and will
continue to repeat the section that you chose until you cither
press STOP or press the A-B button again.
Note A-B repeat works only during normal playback mode,
not in PROGRAM mode.
Timer playback
When the power is turned on to the unit, it will begin
playing automatically if it has a disc in it. If you plug the
compact disc player into an ordinary timer, you can have it
begin playback at a preset time.