Pioneer SX-255R Service Manual page 28

SX-255R, SX-205
« The illustration shows the SX-255R.
W@ PHINEER sree weeermSX-255R
@ POWER STANDBY/ON switch/STANDBY indica-
tor (SX-255R)
This is the switch for electric power.
ON: When set to the ON position, power is supplied and the
unit becomes operational.
STANDBY: When set to the STANDBY position, the main power
flow is cut and the unit is no longer fully operational. A
minute flow of power feeds the unit to maintain opera-
tion readiness. The STANDBY indicator is illuminated
during standby mode.
* The accessory remote contro! unit can also be used to operate
STANDBY/ON.
NOTE:
When the power is initially turned ON, muting will be applied to
prevent sound from being output for approx. 5 seconds.
@ POWER switch/POWER indicator (SX-205)
When this switch is pressed, power is supplied to the unit and the
indicator lights up.
Press the switch again to turn power OFF.
[Timer ON/OFF possible]
When the unit is switched ON, ON/OFF control can be performed by
means of the optional timer.
NOTE: :
When the power is initially turned ON, muting will be applied to
prevent sound from being output for approx. 5 seconds.
@ SUPER BASS button
When this button is pressed, the bass sound will be emphasized.
35
@ Function buttons
Use to select playback source.
[PHONO]
Press when listening to record playback on a turntable.
[TUNER]
Press when listening to AM or FM broadcasts with a tuner.
[LD/DVD]
Press when listening to programs from a component connected to
the LD/DVD jacks.
[CD] '
Press when listening to compact disc playback with a CD player.
[TAPE 1/VCR]
Press when listening to tape playback on cassette deck 1 or ona
video cassette recorder.
@ TAPE 2 MONITOR button
Press when listening to tape playback and monitor the recording
sound with the cassette deck 2.
® VOLUME control
Use to adjust volume level.
© PHONES jack
Connect the plug on your headphones to this jack. To listen to a
program through the headphones, set both SPEAKERS A and B
switches to the OFF position.
@ SPEAKERS ( Hf. OFF, -= ON) buttons
These are used to select the speaker through which you wish to
listen.
A: When the speakers connected to the A terminals are in use.
B: When the speakers connected to the B terminals are in use.
¢ Tum both A and B speakers to the OFF position when only the
headphones are in use.
NOTE:
No sound will be heard through the speakers when both A and
B buttons are pressed if only one set of speakers has been con-
nected to either A or B SPEAKERS terminals.
MEMORY button
When the unit is in the frequency display mode, pressing this button
will result in the memorization of the current broadcast band, recep-
tion frequency, CLASS and FM MPX mode.