200M ENTERTAINER STEREO MIXER
OWNER'S MANUAL
FEATURES
Inputs 1 Through 8
•
Transformerless balanced mic/line input
•
Gain control
•
Clip indicator
•
Monitor send
•
Effects send
•
Three-band EQ, with mid-frequency sweep
Input 9
•
Auxiliary input for high-impedance or line-level
sources
•
Monitor send
Master Section
•
Lexicon 16-bit digital effects processor with
thirty programs built-in
•
Two nine-band graphic equalizers with
Constant Range™ for reduced interaction be¬
tween frequency bands
•
Two ten-segment peak-responding LED
bargraph meters
•
40-volt phantom power for condenser
microphones
•
Mono output master control
•
Patching access jacks for mixer, equalizers
and amplifiers
•
Effects send and return system for external
effects
Power Amplifier Section
•
Two Class-AD switching power amplifiers
•
Compressor prevents distortion from clipping
•
Power amplifier assign switch which changes
between normal stereo operation and mono
operation with monitors
DESCRIPTION
The 200M Entertainer mixer is a stereo mixer with
nine input channels and two built-in power amplifiers.
The unit has a lightweight and durable chassis with
a recessed front panel for control knob protection.
The mixer's lightweight design combined with its
high-power amplifiers make it a step ahead of the
competition.
The mixer consists of eight channel inputs which may
be used as either a balanced mic input or a high-im-
pedanceline input. Each of these channels has a gain
control, clip LED, independent monitor send, a three-
band equalizer with mid-frequency sweep, effects
send, pan control, and slide fader.
The mixer also contains one auxiliary input channel
for high-impedance or line-level sources. This chan¬
nel has an monitor send, pan control, two-band
equalizer, and slide fader.
The master section of the mixer is made up of two
nine-band graphic equalizers, a Lexicon digital ef¬
fects processor and
master internal effects level
controls. The Lexicon processor has thirty user-
selectable programs which include echo, reverb, and
special effects.
A power amplifier assign switch allows switching
between normal stereo operation and mono opera¬
tion with monitors. The power amplifier assign switch
assigns amplifiers and equalizers with no patching
required.
Two Class-AD switching power amplifiers deliver 300
watts per channel into 4 ohms. Power Lock™ cir¬
cuitry prevents amplifier clipping.
The amplifiers
have short circuit and thermal protection.
Three Electro-Voice accessories complement the
200M mixer. The 200M is compatible with all Electro-
Voice Stage systems, however, because of its light
weight and small size, the S-200 is the recommended
speaker for use with the 200M. The speaker system
is a two-way constant-directivity system with a 300-
watt long-term power-handling capacity. The system
features the EVM® -12S Pro-Line woofer and a high-
output version of the Super-Dome ™ 1.5-inch tweeter.
The S-200 equalizer extends the low-frequency
response limit of the S-200 speakers by almost one
octave, from 90 to 50 Hz, while providing 4 dB of
increased efficiency. A carrying case for the mixer
(EPC-200M) is also available.
two