Table of Contents
Advertisement
200M ENTERTAINER STEREO MIXER
OWNER'S MANUAL
black/red, brown/red, brown, and black. Disconnect
the leads by pulling them straight out until the con¬
nectors disengage. Long-nose pliers are helpful to
disconnect the wires.
5.Select the desired operating voltage from the
Primary Wiring Configuration table and reconnect
the primary transformer leads accordingly.
Push
each lead connector into the terminal block firmly
until it locks into place.
Unused terminal blocks
should be plugged with white connector plugs.
6. Refer to Table 2 and install the correct line fuse.
7. Reinstall the power amp cover and top cover with
the screws removed earlier.
twenty-four
Advertisement
Table of Contents
