Makita GA7061 Instruction Manual page 8

For public low-voltage distribution
systems of between 220 V and 250 V
Only for model GA7061 / GA9061
Switching operations of electric apparatus cause volt-
age fluctuations. The operation of this device under
unfavorable mains conditions can have adverse effects
to the operation of other equipment. With a mains
impedance equal or less than 0.25 Ohms it can be pre-
sumed that there will be no negative effects. The mains
socket used for this device must be protected with a
fuse or protective circuit breaker having slow tripping
characteristics.
Noise
The typical A-weighted noise level determined according to EN62841-2-3:
Model
GA7061
GA7061R
GA9061
GA9061R
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual use of the power tool can differ from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time).
WARNING:
Grinding thin sheets of metal or other easily vibrating structures with a large surface can
result in a total noise emission much higher (up to 15 dB) than the declared noise emission values.
Set heavy flexible damping mats or such to those workpieces to prevent them from emitting sound.
Take the increased noise emission into consideration for both the risk assessment of noise exposure and
selecting adequate hearing protection.
Vibration
The vibration total value (tri-axial vector sum) determined according to EN62841-2-3:
Work mode: surface grinding with normal side grip
Model
GA7061
GA7061R
GA9061
GA9061R
Work mode: surface grinding with anti vibration side grip
Model
GA7061
GA7061R
GA9061
GA9061R
Sound pressure Sound power level
level (L ) : (dB(A)) (L
pA
94
94
94
94
Vibration emission (a ,
h AG
7.0
7.0
6.5
6.5
Vibration emission (a ,
h AG
6.5
6.5
5.5
5.5
8 ENGLISH
Uncertainty (K) :
) : (dB(A)) (dB(A))
WA
102
102
102
102
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
1.5
2
) : (m/s ) Uncertainty (K) : (m/s
1.5
1.5
1.5
1.5
3
3
3
3
2
)
2
)