Adjustment - Kenwood LVD-K9200 Service Manual

ADJUSTMENT
advance.
Replacement of
pickup ass'y
Adjustment of
mechanism
Side A and B
R-dependence,
tangential
Electric adjustment
¢ Tilt balance
* Focus error balance
* Tracking error balance
* Focus gain
* Tracking gain
2. Removing Procedure of Pickup Unit
1. Disconnect the flexible cable of the pickup assem-
bly. Remove the switch board (Two screws) (@).
2. Move the pickup assembly to the point A, and re-
move the pickup guide (One screw) (@).
3. Remove the disc motor assembly (Four screws)
(©).
4. Remove the pickup assembly by moving it in the di-
rection of the arrow (@).
LVD-K9200
33