Advertisement
Using the control Panel
ON/OFF
A
Power(Figure6.A):
Flame
B
Heat
c
Figure6
Temperature
D
Timmer
E
Press the POWER button to tum on the unit.Press again to tum off the unit. As long as the unit is
powered on, the log-set will be alight and all functions arc access able.
Flame button(Figure 6.B):
Flame button controls the brightness of flame effect from the highest to lowest setting. There are 5
levels of the flame brightness. To change the flame color on manual button, hold down the flame
button for 3 seconds. The coal bed flame will change from Yellow to Red, hold down flame button
for 3 seconds again. the flame will change from Red to Blue, 3 seconds again will change Blue to
Yellow &Blue Hold the flame button third time for 3 seconds, the flame color will come back to
Yellow.
Heater(Figure 6.C):
Press once
to
active the low Heat setting(L),prcss the button a second time to activate the High
heat sening(H). And a third time to a activate the "Auto" function.
Temperature(Figure 6.D)
The highest temperature of thermostat is 82F
o
and the lowest is 62F" . Once the Heater is
actiYated. the display screen will display the heater setting in use.
Timer(Figure6.E)
Press once to activate the TIMER, use the Timer to have the unit turn off automatically after 1 H up
to 8hours, the display screen
will
display the setting shortly.
Advertisement
